10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (2022)

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (1)

Air compressors make any work or project you wish to carry out much easier and simpler than it used to be. A few years ago most of the air compressors you would see outside of an industrial setting would be found in gas stations. Over the years, however, you can now find air compressors much more suited to the less obvious industrial setting and even compressors which are suitable for use in the domestic garage or garden. You may have never thought about installing an air compressor into your home garage before, but they can be very beneficial. Essentially the main benefit of having an air compressor is that they take out a lot of the hard work that goes into using wrenches, and hammers, etc usually.

Air compressors simply alleviate the effort needed to use these tools. Most often air compressors are used for cleaning stone of brick as well as powering home tool equipment like staple guns, as well as powering hammers or saws. This means you can finally stop putting off that laborsome project because once you purchase an air compressor, the jobs effort will be halved! We know looking for a compressor can be daunting at first. But trust is we’re not experts either, we’re just like you, and we found it’s not that hard at all.

To get yourcompressorto work all you need to do is connect it to your power tools and you can get going. We understand thereisso much reading and jargon attached with buying a compressor but don’t you worry if you read this article we’ve done the work for you. We pulled together the best 10 air compressors we could find on the market, all you need to do is check which is best to use alongside your favorite tools and you’re ready to go!

Looking for something more industrial? Try a 20-gallon modelor even a 30-gallon option.

View the Best Air Compressors for Home Garage, Below.

  • Bostitch BTFP02012 Oil-Free
  • Makita MAC2400 Big Bore 2.5 HP
  • California Air Tools CAT-1P1060S
  • PORTER-CABLE C2002-WK
  • DEWALT DWFP55126 Pancake Compressor
  • California Air Tools 8010 Ultra Quiet
  • Makita MAC700 Big Bore 2.0 HP
  • DEWALT DXCM271.COM Compressor
  • Campbell Hausfeld DC080500
  • Campbell Hausfeld DC040500 Quiet Air Compressor

1. Bostitch BTFP02012 Oil-Free

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (2)

The Bostitch comes with a 150 max PSI 6.0-gallon tank, a 2.6 SCFM and a 90 PSI pump. This means you’ll be able to run your compressor for a pretty long time and when it finally does need to cool down, it will quickly and quietly so you’ll be ready to use it ASAP. The compressor operates at 78.6 dBA which means you’ll be able to work in a quiet environment which is handy if you’re thinking of using this compressor in a home garage environment.

What we loved about this compressor is how easy it is to store. It’s 29lb. Weight makes it small and narrow enough to carry to a different location or easily hide it away in storage.

Check Price on Amazon ➞

2. Makita MAC2400 Big Bore 2.5 HP

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (3)

The Makita really makes use of modern design when it comes to making air compressors. Featuring an impressive 125 PSI, an even more lightweight design than the Bostitch above at 23.1 lbs. And even quieter noise at 72 dBA. As you can imagine this air compressor makes an ideal choice for home garage use it’s compact, stylish and quiet.

Its design really lends itself to being carried around thanks to the easy grip rubber handle at the top and impact reducing suction pads at the bottom. This makes it suitable for ay carpentry, furniture or cabinet construction.

Our favorite features of this compressor has to be the roll cage construction which provides extra protection of the motor and pump!

Check Price on Amazon ➞

3. California Air Tools CAT-1P1060S

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (4)

This California Air Tool is nicknamed ‘Light and quiet,' and it really is one of the quietest compressors out there on the market with low decibel sound of 56! But don’t let the quiet noise levels of this compressor make you think that it won’t power up your tools efficiently. With 90 PSI you’ll still be able to use all your essential tools such as blow guns, airbrushes, and nail guns, etc.

(Video) Best Air Compressor 2022 | Top 10 Best Air Compressor For Home & Garage

It’s also great for carrying around the house by weighing only 20 pounds. This compressor is a great staple for any household that requires using it for basic power tools and needs some peace and quiet.

The best part about the California compressor is how unbelievably quiet it is as 56 decibels that’s less noise than your friends make watching a match.

Check Price on Amazon ➞

4. PORTER-CABLE C2002-WK

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (5)

The Porter Cable is a great long life no maintenance compressor thanks to its oil-free pump and quick recovery time. You’ll also be able to carry it around easily thanks to its firm handle grip on the top, and it’s 30 lbs. Weight. You’ll also be able to carry this compressor around or plug it into an extension cord in any cold weather this is because of its low-amp 120 motor. All of these features combined make this product really great for any long use air tool.

We loved the shape of this Porter Cable as it’s pancake shape makes it super sturdy with its 6-gallon capacity and rubber feet!

Check Price on Amazon ➞

5. DEWALT DWFP55126 Pancake Compressor

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (6)

The Pancake Compressor’s manufacturers really go out of their way to make sure every single part of using this compressor is easy and efficient for you to use at all times. From the lightweight 30 lbs and their quiet work noise of 75.5 dBA which allows you to take this compressor anywhere and not have to worry about causing too much of a hassle.

This compressor continues to help you even after it’s initial use from the easy to store away design thanks to the cord wrap system and the ball valve for quick draining.

We couldn’t really agree on one particular feature we like about this compressor as all of its features combined make it so easy and efficient to use.

Check Price on Amazon ➞

6. California Air Tools 8010 Ultra Quiet

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (7)

The California Air Tools is a great Ultra Quiet compressor that designed with household, garage and general domestic usage in mind thanks to its quiet 70 decibel sound. This new California series combines all of this portable quiet compress-ing with a motor operating system of 1680 RPM meaning it is designed for longer periods of time with a heavy-duty performance! This compressor is also oil-free which means you won’t have to oil it ever and it will also work well in cold weather and rocky terrains.

We love how easy this compressor is to clean thanks to its oil-free compressor.

(Video) Top 5 Best Air Compressor For Home Garage Review in 2022

Check Price on Amazon ➞

7. Makita MAC700 Big Bore 2.0 HP

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (8)

This Makita is a luxurious cast iron pump which delivers maximum performance, with their substantially lower noise levels but a large power which is 2.0 HP Motor. This high-performance compressor means you’ll be able to have all the power of an industrial size compressor but with much lower maintenance and even lower noise output.

You’ll also be able to use this compressor at its high-performance capacity for a very long time. This is thanks to it’s lower RPM which prolongs motor life giving you a durable product you can rely on!

This Makita gives an overall great performance thanks to its low noise and low amp but super high output - and this is why we love it!

Check Price on Amazon ➞

8. DEWALT DXCM271.COM Compressor

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (9)

The DeWalt is a great portable compressor, which provides 85% more than its competitors regarding air tool run time thanks to its 200 max PSI. The power that this compressor gives means it’s great to use with spray guns from 40 PSI right up to large projects such as car repairs up to 200 PSI.

Many of the experts out there it’s great for small projects in a commercial garage or small projects around the home. And some even argue that being electronic and oil-free means they’ve ended up saving money.

We liked how this is great for large home garages or small work environments.

Check Price on Amazon ➞

9. Campbell Hausfeld DC080500

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (10)

The Campbell Hausfeld is a great compressor for the home it’s versatile and durable enough to carry around. For instance, you can use this compressor to finish off many projects quickly from stapling to hobby painting and inflation. You’ll be able to undertake all of these tasks easily thanks to the 8 gallon and 125 max PSI power this compressor provides.

And what’s even better is that thanks to its oil-free usage you’ll never had to deal with any dirty oil, so it’s super easy and requires no maintenance.

We loved this Campbell as it’s great for outdoor use with an extension chords with-out waking up our neighbor's thanks to its low decibel humming.

(Video) The 10 Best Portable Digital Air Compressors 2022 Reviews.

Check Price on Amazon ➞

10. Campbell Hausfeld DC040500 Quiet Air Compressor

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (11)

The Campbell Hausfeld DC040500 is a great product that is designed to last, with a dual pump compressor which even operates on slower speeds depending on your needs. This compressor is great as it is 80% quieter than other standard oil-free compressors at only 68 decibels and designed perfectly to work for various different jobs from home maintenance to crafts and hobbies.

Its oil-free design makes it easy to use as it requires no cleaning, but this in particular compressor lives up to 4 times longer than most other oil-free compressors.

Our favorite feature with this product has to be the roll cage design which keeps the pump and motor safe and makes for easy portability.

Check Price on Amazon ➞

Buyer’s Guide

We hope you’ve enjoyed reading the 10 product we reviewed just above and we now hope you understand what compressor products are out there on the market. There are lots of different sizes and strengths available, and we know it can be incredibly tricky to identify which is best for you. To help you decide the paragraph below discuss in further detail different things to consider when purchasing a compressor.

Strength & Size

When buying an air compressor, the size can really vary depending on what you’re using it for. The size of your compressor needs to be powerful enough for the tools you will be using it with. Of course, when it comes to using these in home garages, you might not be able to take on compressors with as much strength. When it comes to the CFM rating, we recommend anything between 9.0 CFM and 14 CFM. With the 9CFM being more suited for homes and tools needing less power and 14 CFM being more suited for stronger power tools. You might just need a small air compressor.

On the other side of the coin, when it comes to the pressure, the compressor produces you will probably discover that most tools will need around 90 PSI. Again this all depends on what tools you will be using it will but basically the lower the PSI and CFM of the compressor the lower the power and the higher ratings, the higher the power of tools you can use.

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (12)

Another important feature to consider when buying an air compressor is the duty cycle. The duty cycle is how long you can use your air compressor for before it reaches maximum heat and will need to cool down by shutting off. Experts recommend if you want to get the best usage out of your compressor you will need to select one with at least a 50% cycle.

Oil vs. Oil-Free

Another factor to consider when which type of compressor to buy is whether or not you would like an oil-based lubricated compressor or an oil-free one. Oil-less compressors are usually cheaper than the oil-based equivalent. Air compressors in general draw in air into a storage tank and need to keep the piston chamber lubricated in order to keep drawing in air. The oil-based compressors need constant lubricated from oil. Whereas the oil-free are usually permanently lubricated from construction with Teflon. Both of which come with different benefits.

(Video) 10 Best Air Compressors 2022 You Can Buy For Home Garage

For instance, oil-free compressors usually require little to no maintenance and are great for using around the home. However, they do not last as long as the oil-based compressors as the Teflon that lines their piston will eventually wear out. Oil-based compressors are a lot more complicated to clean however they will last longer, and this is why you will usually find these more in industrial settings. It depends on how you’re going to use your compressor and how often you will use it.

Maintenance

Air compressors take in air and convert it out into a higher pressured amount of air. This is required for using power tools of various shapes and sizes. The compressor store the energy of gas within the storage tank. You must look after your compressor otherwise it will not last as long. Cleaning your compressor will vary from model to model especially if it is oil-based or not. But in general, you should consider following these steps to help prolong the lifespan of your compressor. You can release the moisture from the valve after every use.

Not only is this important to keep it working at it’s the best performance every time you use it. Removing the moisture will also prevent it from becoming rusty. Every now and again you should also check the components and valves are all in the right places and as tight as possible. If anything has moved, you should make sure you replace them as soon as possible.

From time to time your compressor may not be functioning as well as it normally does if this is the case you should check whether or not the valve on it is safely positioned. If your compressor is oil-based, you should make sure you lubricate it on time.

What size Air Compressor for a Home Garage?

Of course, it completely depends what you’re using your compressor for the air compressor must meet the required size of your tools. We would recommend a compressor of around 9.0 CFM.

How to Setup a Garage air Compressor System?

It Is surprisingly easy to install an air compressor but more complicated than plugging it in. You must first take notice of the paragraph above if you’re installing it into your home to make sure it is suitable. Firstly you need to assign the area you’re going to place your compressor in as well as assessing how much you will have left to use your power tools. You should also place down some isolator pads, and this will help stabilize the compressor in place as well as minimizing the noise from its vibrations.

10 Best Air Compressors For Your Home Garage [ 2022 Reviews ] (13)

And let’s face it no one wants to be shouted at for making too much noise while trying to use their tools. After this, you need to look at your attachments and select the right size. Then after reading the manual attached you set up the compressor and attached to the power outlet you’ve selected for its use.

What Oil Goes Into a Garage Air Compressor?

It should go without saying that not all compressors require any oil at all, as some are completely oil-free. However, the air compressors that do require oil, requiring lubricating now and again. It may seem like a complicated, and you don’t want to damage your machine by putting in the wrong oil. Some customers would argue that it doesn’t matter which oil you put it as it will all work in the same manner.

(Video) 5 Best Air Compressors For Home Garage - Review in 2022

When we spoke to experts, however, they said it is best to put an air-compressor oil in your compressor as opposed to motor oil. They recommend using specially designed oil rather than normal automotive oil usually has more detergents in it which can damage your machine.

Expert Tip

If you want to keep your air compressor running as best as it can for as long as possible, make sure you always drain the moisture from the tank after every use.

Did you know?

Oil-less compressors will get hotter as there is no wet oil instead the piston to cool it down.

FAQs

What size air compressor do I need for my garage? ›

For your home garage, a compressor size in the 2.6-gallon to 20-gallon range should do nicely.

How many CFM is a good air compressor? ›

Air tools made for general use with portable air compressors typically require 0 to 5 cubic feet per minute (cfm) at 70 to 90 pounds per square inch (psi), whereas with larger tools connected to stationary systems, the requirements usually exceed 10 cfm at 100 to 120 psi.

What type of air compressor lasts the longest? ›

Rotary screw air compressors last longer than reciprocating air compressors. Like an engine, reciprocating compressors have piston rings and other components that contact each other and wear over time. With that wear comes a decrease in performance, oil carryover and more heat generation.

What is the best PSI for an air compressor? ›

Most air tools require between 70 and 90 PSI. Any light-to-medium-duty air compressor can easily handle 90 PSI, but you always want the compressor to supply more flow than needed.

Is higher CFM better air compressor? ›

CFM is cubic feet per minute, which indicates the compressor's flow rate - or the amount of air that a compressor can produce at a given pressure level. Typically compressors that have higher CFM ratings are able to provide more air, which makes them ideal for larger applications.

What's a good size air compressor for home use? ›

Most air compressors for powering home tools fall within the 10 to 110 Cubic Feet per Minute (CFM) range. NOTE: Air compressors that have lower CFM ratings of about 10-15 are usually enough for tire inflation and home tools such as air hammers, air grinders, nail guns, and sanders, among others.

What should I look for when buying an air compressor? ›

CRITERIA. There are three key aspects to consider when it comes to choosing an air compressor: air pressure, air flow (measured in cubic feet per minute, or CFM), and the amount of air that can be stored in the tank.

How do I choose an air compressor for my home? ›

Determine which one requires the highest CFM at the highest PSI. Add 50 percent to the required CFM for a margin of safety, and look for a compressor that meets the requirement. For example, if a tool requires 3 CFM at 90 PSI, select a compressor that delivers at least 4.5 CFM at 90 PSI.

What is better oil or oil less compressor? ›

While oil-free air compressors are cheaper, lighter and require less maintenance, oil air compressors are more durable. As the oil-free compressors are pre-lubricated, there is no constant maintenance and the unit tends to get dry when the Teflon starts wearing out. They don't last as long as oil air compressors.

Which is better CFM or SCFM? ›

Since SCFM measures volumetric airflow at standard conditions, it will always be higher than the CFM value for an air compressor.

What size air compressor do you need to run an impact wrench? ›

As a simple rule of thumb, the airflow from the air compressor must be at least 3/2 times the minimum requirement of the impact wrench. For example, a 1/2″ drive Impact wrench usually has a requirement of about 5 CFM airflow at 90 psi. So, the airflow rating of the air compressor at 90 psi should be 3/2 * 5 = 7.5 CFM.

Does tank size matter air compressor? ›

The size of the compressor's tank will help to determine the amount of time that your air tools can run before the air compressor shuts off and has to be turned on again. If you only require intermittent use of air-powered tools, you won't need a compressor with a large tank size.

How many HP air compressor do I need? ›

Smaller nozzles will need just 10 CFM at 80 PSI, while larger ones will need 15 CFM or more. Most blast cabinet users rely on 5 HP multiple stage air compressors to ensure a steady supply of air.

How long do oilless air compressors last? ›

How Long Do Oil-Free Air Compressors Last? Oil-free piston air compressors typically last around 10-15 years, while oil-free rotary screw compressors tend to last around 20-30 years. You can generally expect anywhere from 2,000 to 8,000 hours of service.

What size air compressor do you need to spray paint? ›

While some air spray guns have a rating of lower than 10 CFM, we'd recommend your compressor CFM for spray painting is at least 12 CFM. For professionals, this figure may need to be higher – the important thing is you've checked your spray gun's CFM requirements and chosen a compressor that exceeds that figure.

Are belt driven air compressors better? ›

Many experts believe a belt drive compressor is better because a properly lubricated belt system will run in a more smooth manner, which can be both efficient and quiet. On the other hand, belts can wear down, causing you to repair or replace the belts to ensure the compressor is able to function again.

What size air compressor do I need for painting? ›

Look for a minimum of 15 PSI, with some applications, such as clear coat, better-suited to 20 or 25 PSI. HP: For auto painting, a 10 HP compressor will typically suffice. However, higher HP compressors may operate more efficiently and can be used for other tasks.

Can you run 2 air compressors together? ›

Just parallel them. This will work fine as long as the compressors are reasonably close in pressure rating (bar, atm, kPA or PSI). It is vital they be reasonably close, because both/all tanks will equalize pressure at the highest compressor's setting!

How big of an air compressor do I need for a nail gun? ›

If a nailer will be used almost continuously throughout the day, look for a big tank and plenty of horsepower. A 6 gallon tank pancake-style compressor will be about the minimum, and you may be better off with a large twin stack or possibly even a wheelbarrow-style unit.

What is the advantage of a 2 stage compressor? ›

Improved efficiency: Two-stage compressors perform less work to compress air to a given pressure, which means your operating costs are lower. Better reliability: The intercooling stage of two-stage compression creates less chance of overheating, which in turn means more uptime and better productivity.

Is it OK to leave air compressor on? ›

The short answer is yes, it is perfectly safe to leave an air compressor full. However, this assumes that it has been properly maintained, with regular draining to remove accumulated moisture from inside the tank.

How long do air compressors last? ›

The typical lifespan of an AC compressor is between 10 and 15 years while your HVAC system as a whole should last 15 to 20 years.

Will a 6-gallon air compressor fill a car tire? ›

Portable air compressors in the 3- to 6-gallon size, such as those used to operate pneumatic nailers, are good for filling larger-size and heavy-duty tires. If you have a completely flat tire, however, it may take several cycles to refill the tire completely. The larger the tire, the longer it'll take.

What is difference between single and two stage air compressor? ›

The fundamental difference between a single and two-stage air compressor is the number of times the air gets compressed. In a single-stage, the air is compressed one time; in a two-stage, it is compressed twice for double the pressure.

How do I know if my air compressor is good? ›

How to Check for Bad Compressor - YouTube

Does an air compressor need to be refilled? ›

Every time you use your power tool, the tank's pressure will drop as that compressed air goes through the hose to your tool. When the pressure in the tank drops too low, the compressor will kick back on, refilling the tank.

How long will a 6 gallon air compressor last? ›

How Long Do 6-Gallon Air Compressors Last? You can generally expect a 6-gallon air compressor to last around 10-15 years.

Is a 10 gallon air compressor enough? ›

What Size Do You Need for Air Tools? For the best performance, a gallon size of 8-10 is perfect for most air tools. Aim for 3-5 CFM, as well. While these are generalized sizes to give you the best versatility, different tools can require different specs.

How much should a new AC compressor cost? ›

Overall, the average cost to replace a whole-home AC compressor is about $1,500. However, depending upon the size of the unit and a few other factors, it may cost as little as $800 or as much as $3,000. The factors that can affect your AC compressor's replacement or repair cost include your home size and HVAC type.

How often should you change air compressor oil? ›

Generally speaking, a rotary screw air compressor's oil should be changed every 1,000 to 2,000 service hours, while a reciprocating air compressor's oil needs to be changed every three months. If you notice performance issues with your air compressor, check the oil first—it may be affecting the pressure and efficiency.

Can I use regular motor oil in my air compressor? ›

It is possible to use a standard weight motor oil in your compressor. While this isn't the top recommendation, it could get you by. Generally, it is not recommended to run a multi-viscosity oil in a compressor since it might cause foaming issues. Sticking with a 20W or 30W oil is your best choice.

Do you need to oil an air compressor? ›

Share via. Air compressors require constant oil lubrication to prevent friction on the pistons or screws and other moving parts. To make sure your air compressor is running efficiently, it is important to check your oil level regularly and to know how much oil your compressor needs.

How many SCFM does it take to paint a car? ›

CFM – Cubic Feet per Meter

How many CFMs do you need to paint a car? Typically, spray guns work best between 80 and 100 CFM. This means you need a compressor that has a CFM rating of 4 to 19 for the best results.

What SCFM do I need? ›

Look for the "SCFM at 90-psi" number when comparing SCFM ratings. Smaller tools usually require between 0- to 5-SCFM, while larger tools can require 10- or more SCFM. To gauge the minimum compressor SCFM rating you need, examine the SCFM requirements of all the tools you intend to use.

DOES CFM change with PSI? ›

Understanding Cubic Feet Per Minute (CFM)

CFM is measures at a given PSI and increases in direct proportion to the horsepower (HP) that is applied.

How many PSI does an impact wrench need? ›

How much air pressure does an air impact wrench? This will be determined by the air impact wrench you intend to use. Most air impact wrenches, in my experience, require roughly 100 PSI to operate; but some more power-hungry wrenches may require up to 135 PSI.

Is a 20 gallon air compressor big enough? ›

Most 20-gallon air compressors are powerful enough for most hobbyist needs, but they can also easily meet the needs of many garage and light industrial jobs, making them a great all-around option for a wide variety of tasks. You can also use them to inflate sporting equipment and car and truck tires. Low maintenance.

What does scfm mean on an air compressor? ›

What Is SCFM? Standard cubic feet per minute measures the flow rate of gas under standard pressure and temperature conditions. The accepted standard values for temperature and pressure are 68 degrees Fahrenheit and 36 percent humidity at sea level.

How do I know what size air compressor I need? ›

Determine which one requires the highest CFM at the highest PSI. Add 50 percent to the required CFM for a margin of safety, and look for a compressor that meets the requirement. For example, if a tool requires 3 CFM at 90 PSI, select a compressor that delivers at least 4.5 CFM at 90 PSI.

How do I work out what size compressor I need? ›

The CFM (cubic feet per minute) is the first step and determines the required capacity of the compressor. To calculate the CFM correctly, try: CFM = (fpm * area), where fpm is the feet per minute. To find the cubic feet per minute, substitute the FPM value with the area after the area is squared.

How do I know what size compressor I need? ›

To get a feel for how much air (CFM) you will need, you can figure roughly 4-5 CFM per person in an automotive shop and 12-15 per person in a body shop. Once you determine the CFM you need, take that figure times 1.25 and use that total CFM to choose your compressor.

What size air compressor do you need to run an impact wrench? ›

As a simple rule of thumb, the airflow from the air compressor must be at least 3/2 times the minimum requirement of the impact wrench. For example, a 1/2″ drive Impact wrench usually has a requirement of about 5 CFM airflow at 90 psi. So, the airflow rating of the air compressor at 90 psi should be 3/2 * 5 = 7.5 CFM.

What is better oil or oil less compressor? ›

While oil-free air compressors are cheaper, lighter and require less maintenance, oil air compressors are more durable. As the oil-free compressors are pre-lubricated, there is no constant maintenance and the unit tends to get dry when the Teflon starts wearing out. They don't last as long as oil air compressors.

How do I select a compressor? ›

To select the proper compressor the actual purpose will need to be discerned as well as design values, such as pressure, temperature, flow rate and type of compressor. Data on gas, required flow rate, suction pressure and temperature and discharge pressure are key values for compressor selection.

Does tank size matter air compressor? ›

The size of the compressor's tank will help to determine the amount of time that your air tools can run before the air compressor shuts off and has to be turned on again. If you only require intermittent use of air-powered tools, you won't need a compressor with a large tank size.

How many HP compressor do I need? ›

Air compressors typically have a horsepower rating between 1.5 and 6.5, though some larger, stationary air compressors can have up to 15 HP. If you are using standard electric power outlets, you'll need an air compressor at 2 HP or less because standard AC cords require lower voltage to function.

Which compressor can supply more volume of air? ›

Centrifugal Compressors

They are seen mainly in high-volume applications such as commercial refrigeration units in the 100+ hp ranges and in large processing plants where they can get as large as 20,000 hp and deliver volumes in the 200,000 cfm range.

How do I know what CFM my air compressor is? ›

How Do You Calculate CFM for an Air Compressor?
  1. Next, convert to standard pressure (ATM). ...
  2. Tank Pump-up Time = 1 min 8.4 seconds (1.14 minutes)
  3. The three primary factors are: ...
  4. CFM = Tank Volume in Cubic Feet x Standard Pressure (ATM) During a Cycle x Cranks per Minute.

What are the three types of compressors? ›

The three most common air compressors are the reciprocating, rotary screw and centrifugal. Reciprocating air compressors are considered positive displacement machines, which means they increase the pressure of the air by reducing its volume.

What does scfm mean on an air compressor? ›

Standard Cubic Feet per Minute (SCFM) is the rate of flow of a gas or air through a compressor at standard temperature and pressure conditions.

What is SCFM vs CFM? ›

CFM is airflow measured at any temperature and any pressure. SCFM is airflow measured at a specific temperature (68°F) and at a specific pressure (14.7 psi).

How many PSI does an impact wrench need? ›

How much air pressure does an air impact wrench? This will be determined by the air impact wrench you intend to use. Most air impact wrenches, in my experience, require roughly 100 PSI to operate; but some more power-hungry wrenches may require up to 135 PSI.

What size air compressor do I need to change tires? ›

What Size Do You Need for Tires? For home use, a simple 3- to 6-gallon tank is fine, and a CFM of 2-3 is perfect for the continuous air dispersal needed to fill a tire. The small tank size is also ideal for portability. An air compressor of this size is great for general home use and smaller-sized air tools.

What size air compressor Do I need to spray paint? ›

While some air spray guns have a rating of lower than 10 CFM, we'd recommend your compressor CFM for spray painting is at least 12 CFM. For professionals, this figure may need to be higher – the important thing is you've checked your spray gun's CFM requirements and chosen a compressor that exceeds that figure.

Videos

1. Top 5 Best Air Compressor for Home Garage [Review in 2022]
(Review Today)
2. Best Air Compressor for Home Garages 2021 | Top 10 Air Compressor for Home Garage Buying Guide
(Top 5 Product)
3. Best Air Compressor For Home Garage In 2022 - Top 10 Air Compressor For Home Garages Review
(ToolBox)
4. Best 30 Gallon Air Compressor In 2022 - Top 10 30 Gallon Air Compressors Review
(Auto Gear)
5. The 10 Best 12V Air Compressors 2022- Reviews & Buying Guide.
(Electronics hub)
6. Best Air Compressors Reviews 2022 - Top 5 Picks
(Tools Informer)

You might also like

Latest Posts

Article information

Author: Dong Thiel

Last Updated: 06/22/2022

Views: 5702

Rating: 4.9 / 5 (59 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Dong Thiel

Birthday: 2001-07-14

Address: 2865 Kasha Unions, West Corrinne, AK 05708-1071

Phone: +3512198379449

Job: Design Planner

Hobby: Graffiti, Foreign language learning, Gambling, Metalworking, Rowing, Sculling, Sewing

Introduction: My name is Dong Thiel, I am a brainy, happy, tasty, lively, splendid, talented, cooperative person who loves writing and wants to share my knowledge and understanding with you.